You have no items in your shopping cart.
Led Gu-10 5Watt 4000K Dimmable COU
Product Description
Details
LED Gu-10
5Watt Globe
5Watt Globe
Range
5Watt 3000k Dimmable
5Watt 4000k Dimmable
5Watt 4000k Dimmable
Lumens
5Watt 3000k 450 Lumens
5Watt 4000k 470 Lumens
5Watt 4000k 470 Lumens
Dimming
Clipsal LED 32ELEDM
Dimmer Checklist
Please make sure the minimum load rating of the Dimmer is lower than the total Wattage of the LED lights on the Dimmer.
As an example if the minimum load rating of the Dimmer is 20Watts. Then you will need at least 20Watts of LED lights on the Dimmer to eliminate flicker.
As an example if the minimum load rating of the Dimmer is 20Watts. Then you will need at least 20Watts of LED lights on the Dimmer to eliminate flicker.
LED Checklist
Please check you have the correct Dimmer assigned to the LED light.
Please make sure there is no other device on the same circuit that can interfere with the LED light. Examples are Fluorescents, Sensor Lights, Timers, Other LED Lights.
Please make sure there is no other device on the same circuit that can interfere with the LED light. Examples are Fluorescents, Sensor Lights, Timers, Other LED Lights.
Soft Glow
If your globes have a soft glow when turned off. This is caused by Voltage/Current leakage or coiled power lines in the house causing a magnetic charge.
Reason for leaking voltage: Faulty Switch Mechanism.
Faulty Dimmer
Incorrect Switch on the neutral.
2 or 3 Way Switch
Ways To Resolve:
Electrician must identify the fault, as listed as a possibility of above.
Replace faulty switch mechanism or dimmer and test.
Ensure switch is on the active line, not neutral.
Instal Clipsal Load Correction Capacitor. The Clipsal 31CAP.
Reason for leaking voltage: Faulty Switch Mechanism.
Faulty Dimmer
Incorrect Switch on the neutral.
2 or 3 Way Switch
Ways To Resolve:
Electrician must identify the fault, as listed as a possibility of above.
Replace faulty switch mechanism or dimmer and test.
Ensure switch is on the active line, not neutral.
Instal Clipsal Load Correction Capacitor. The Clipsal 31CAP.
Important
Do Not Use Timers
Do Not Use Sensor Lights
Do Not Use Sensor Lights
Specifications
265Volt Surge Protection
Beam Angle 60 Degrees
Light Quality 80 CRI
Soft Edge Reflector
COB Led
Beam Angle 60 Degrees
Light Quality 80 CRI
Soft Edge Reflector
COB Led
Dimensions
Height 57mm
Width 50mm
Width 50mm
Stock 5Watt 4000k
Reviews
Delivery Info
How much does shipping cost?
We are committed to keeping shipping costs as low as possible. The cost to ship your items will depend on where in Australia your items will be shipped, how big they are and how many items you've ordered. Your shipping cost will be caculated and displayed to you BEFORE your payment. Alternatively, a freight estimator is available at check out page. i.e. your shopping cart page
Who do you use to deliver the goods?
We either use Australia Post or a network of Couriers depending on the delivery destination and the size of the order.
How long will it take for me to receive my order?
Most orders will be received within 5 - 7 Business Days, however some of our products are highly customisable or are imported from Europe and for these products delivery can take between 4 - 6 weeks. Where this is the case, we will contact you before processing your order to confirm the expected delivery date.
Stock Availability
Stock Availability
This product is usually in stock.
Can I check product availability before I purchase?
Yes, of course, send us email and we will confirm the stock availability for you immediately.
What if I made the payment but realize the product is out of stock?
We will contact you immediately. An estimated time of arrival will be given. We can put a back order for you or you could choose to get full refund.
